This is a 775 DC motor with bracket and 20A DC Motor Speed Controller, the mounting brackets are designed to be used as an additional support for your motors or as an alternative mounting option.
The motor is with ball bearing, large torque, low noise, built-in cooling fan,durable and long service life. The speed regulator can adjust the motor speed, suitable for all kinds of DIY, craft.
Adjust the knob of potentiometer to change the output occupying Vacancy proportion of controller, and the motor speed will change.
Modle: 775 Motor
The Specifications of the motor:
Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM.
Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM.
Starting current: 4-5A;
Motor Body Diameter: 42mm ;
Motor Body Length: 66.5mm;
Shaft Length: 16mm;
Shaft Diameter: 5mm
The specification of the speed controller:
Input Voltage: DC 10V-DC 60V (Ultra wide working voltage);
Output voltage: linear under load;
Control Power: 0.01-1200W;
Rated Current: 10A;
Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.);
PWM Duty Cycle: 0%-100%;
PWM Frequency: 25Khz;
Product Size(L x W x H): 77*45*28mm;
The Specification of the Bracket:
Mounting hole diameter: 4mm
Thickness of bracket: 3mm
Application:Hand tools,garden tools, power tools,shredder, sprayer, small cutting machine, small table saw for cutting/polishing.
1 x DC Motor, 1 x Speed Control, 1 x Bracket
1.Please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 9V-60V,otherwise it will be burned out.
2.Positive and negative pole of the POWER and the MOTOR can NOT be reversed.
3.There is a slight discrepancy in measurements, please check before ordering!!
Lifetime technical guidance support! You are welcome to share your usage process with us at any time.
1 year warranty (free exchange)