This is a DIY combination of motor, bracket, B10 drill chuck，and 20A PWM speed controller, it can be used with a saw blade to become a mini saw.
The saw blade can cut wood, pc sheet, pvc sheet and many other sheets. The clamping range of drill bit is 1.5-10mm, which can meet most of the needs.
Modle: 775 Motor
The specification of motor:
Shaft Type: Double Shaft
Shaft Length: 16mm
Shaft Diameter: 5mm
Rated Voltage: DC 12V, Unloaded Speed: 6000RPM, The Max Torque: 2Kgf.cm
Rated Voltage: DC 24V, Unloaded Speed: 12000RPM, The Max Torque: 3.8Kgf.cm
The Max Current:12A
Motor Body Diameter: 42mm
Motor Body Length: 66.5mm
B12 drill chuck clamping range is 1.5-10mm(0.06″-0.39″)
M10 bush is suitable for saw blade with inner diameter 16mm（0.63″）, outer diameter 110mm(4.33″)
Application:Hand tools,garden tools, power tools,shredder, sprayer, small cutting machine, small table saw for cutting/polishing.
1 x Motor 1 x Bracket 4 x Wrenches 1 x Saw Blade 1 x B10-5mm Connecting Rod 1 x M10-5mm Connecting Rod 1 x Drill Chuck
1.The table saw is suitable for use with a voltage of 24V DC, working voltage greater than 6A.
2.When installing, please tighten the saw blade and screws so that the saw blade will not fly out and hurt people when the motor starts.
3.There is a slight discrepancy in measurements, please check before ordering!!
Lifetime technical guidance support! You are welcome to share your usage process with us at any time.
1 year warranty (free exchange)