This is a DC 10V-60V 20A DC Motor PWM Speed Controller. It has power supply reverse polarity protection, over-voltage protection, 20A fast-blow ceramic fuse. The “reverse polarity protection” is very important, which can protect the regulator from burnt.
The peak current is 20A, and it is recommended to use within 10A. Within 60V and 600W,
PWM Output Range: 0-100%, the motor can be completely stopped and operated at high speed. The motor can be connected without distinguishing the positive and negative poles, and the direction of rotation can be changed by adjusting the wire sequence.
【Usage:】Adjust the knob of potentiometer to change the output occupying Vacancy proportion of controller, and the motor speed will change.
Input Voltage: DC 10V-DC 60V (Ultra wide working voltage)
Output voltage: linear under load
Control Power: 0.01-1200W
Rated Current: 10A
Max Current: 20A (Long-ting use of 10A, 500W or less, pay attention to keep the module free of heat dissipation conditions.)
PWM Duty Cycle: 0%-100%
PWM Frequency: 25Khz
Wire Length: 20cm
Potentiometer opening Hole: Φ7mm
Mounting Hole Distance: 73*40mm
Product Size(L x W x H): 77*45*28mm
It is equipped with a switch function and a self-recovery fuse, which automatically breaks when the current is too high and recovers when it cools down.
1 x Speed Control； 1 x Speed Control Switch ；
1.Please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC9V-60V,otherwise it will be burned out.
2.This speed regulator is for use with DC brushed motors. It is NOT suitable for speed regulation of DC brushless motors; nor can it be used as a voltage regulator or voltage stabilizer!
3.Positive and negative pole of the POWER and the MOTOR can NOT be reversed.
Lifetime technical guidance support! You are welcome to share your usage process with us at any time.
1 year warranty (free exchange)