This is a DIY combination of 775 DC Motor and 10A DC Motor Speed Controller. The motor is with ball bearing, large torque, low noise, built-in cooling fan,durable and long service life. The speed regulator can adjust the motor speed, suitable for all kinds of DIY, craft.
【Specification】
Brand: CHANCS
Model: 775 Motor
Rated Voltage: DC 12V, Unloaded Speed: 10000RPM, Load Speed: 8800RPM.
Rated Voltage: DC 24V, Unloaded Speed: 20000RPM, Load Speed: 17600RPM.
Starting current: 4-5A; Power: 100W-200W;
Shaft Type: Single Shaft
Shaft Diameter: 5mm
Shaft Length: 16mm
Motor Body Diameter: 42mm
Motor Body Length: 66.5mm
Voltage : DC 12-24V
Speed : 4000-8000RPM,6000-12000RPM,8000-16000RPM,10000-20000RPM,14500-29000RPM
The specification of PWM:
Input Voltage: DC 10V-DC 60V (Ultra wide working voltage)
Output voltage: linear under load? Control Power: 0.01-1200W
Rated Current: 10A
Max Current: 20A (Long-term use of 10A, 450W or less, pay attention to keep the module free of heat dissipation conditions.)
PWM Duty Cycle: 0%-100%
PWM Frequency: 25Khz
Product Size(L x W x H): 77*45*28mm;
【Application】
Used for electric fan, shredder, sprayer, small cutting machine, small table saw, money counter, printer, etc.
【Package Content】
1 x DC Motor, 1 x Speed Control
【Attention】
1.About the PWM, please do not connect AC power directly(Such as:110V AC),the input volt of this controller should be DC 12V-40V,otherwise it will be burned out.
2.Make sure the positive and negative connections are correct before powering on the motor speed controller, it will be damaged if connect the supply voltage with wrong polarity.
【 Guarantee】
Lifetime technical guidance support! You are welcome to share your usage process with us at any time.
1 year warranty (free exchange)
