This is a DIY combination of motor, bracket, B10 drill chuck，and 20A PWM speed controller, it can be used with a saw blade to become a mini saw.
The adjustable voltage range is really smooth, adjustable from 9V to 60V, continuous power 12600W. Suitable for DC motors within 20A
The governor can control the rotation speed of the motor from the original 0%-100% infinitely variable, extremely advanced technology, high efficiency, high torque, small heat generation, wide range of applications.
【Specification】
Brand: CHANCS
Modle: 775 Motor
The specification of motor:
Rated Voltage: DC 24V
Speed: 12000RPM
Starting current: 8A
Power: 280W
Motor Body Diameter: 42mm
Motor Body Length: 66.5mm
Shaft Length: 16mm
Shaft Diameter: 5mm
Slider Size：
Total length: 159mm(6.26″)
Mounting holes for M5 screws
M10 bush is suitable for saw blade with inner diameter 16mm（0.63″）, outer diameter 110mm(4.33″), common with angle grinder.
B12 drill chuck clamping range is 1.5-10mm(0.06″-0.39″)
Belt Pulley Size:
Large pulley: 48 teeth, inner diameter 12 mm(0.47″)
Small pulley: 16 teeth, inner diameter 5 mm(0.2″)
Timing belt circumference: 240mm(9.45″)
Size of Bracket:
Length: 50mm
Width: 52mm
Height: 53mm
Mounting hole diameter: 4mm
Thickness of bracket: 3mm
Slider Size：
Total length: 159mm(6.26″)
Mounting holes for M5 screws
M10 bush is suitable for saw blade with inner diameter 16mm（0.63″）,outer diameter 110mm(4.33″), common with angle grinder.
B12 drill chuck clamping range is 1.5-10mm(0.06″-0.39″)
The specification of PWM Speed Controller:
Speed control mode: potentiometer (linear)
Speed range: 0-100%
Input current: requires more current than the motor
Continuous current: within 20A
The input voltage should be equal to the rated voltage of the motor.
Input voltage range: DC 9-60V output voltage
Linear load output current: 0-20A
Continuous power: 12600W
Control frequency: 25KHz clockwise / counterclockwise rotation; support DC brush motors;
DC brush size: 92x52x36mm
【Application】
Application:Hand tools,garden tools, power tools,shredder, sprayer, small cutting machine, small table saw for cutting/polishing.
【Package Content】
1 x Motor, 1 x Bracket ,4 x Wrenches ,1 x Saw Blade ,1 x B10-5mm Connecting Rod, 1 x M10-5mm Connecting Rod ,1 x Drill Chuck, 1 x PWM Speed Controller
【Attention】
1.The set can use adjustable speed power supply, or switching power supply.
2.Always disconnect the power when wiring.
3.When installing, please tighten the saw blade and screws so that the saw blade will not fly out and hurt people when the motor starts.
4.There is a slight discrepancy in measurements, please check before ordering!!
【 Guarantee】
Lifetime technical guidance support! You are welcome to share your usage process with us at any time.
1 year warranty (free exchange)
